Transmitter: GoolRC FS-T6 High Precision 2.4GHz 6CH Mode 2 Transmitter W/Receiver R6-B for RC Multirotor Quadcopter Helicopter Airplane Glider Car https://www.amazon.com/dp/B012W6HJHG/ref=cm_sw_r_cp_apa_i_1TmaDbW08225H Frame, ESC, & FC: QWinOut F550 Airframe RC Hexacopter Drone DIY PNF Unassembly Combo Set (No Battery and Remote Controller) with Kkmulticopter Flight Controller (DIY Drone Kit for Beginners) https://www.amazon.com/dp/B00PRNMY2M/ref=cm_sw_r_cp_apa_i_tVmaDb9JAX3T3

So this is exactly what I bought. I just got to work so I don't have pictures right now. I think the issue is between the FC and the motors cause I get no response. The actual UAV kit only came with 2 cables (excluding ESC cables) for the rudder, throttle, aileron, and elevator pins. One cable has three wires going into it and three wires going out. I attached this to the throttle pins and channel 1. The other cable has 3 wires going into it but has 3 seperate wires that connect to different connectors. I think this may be where the issue is. In order to space those 3 connections out, I just put the connector across 3 different channels in a vertical fashion. I'll send some pics when I get home if this doesn't make any sense.