I saved this from an older post someone else did. Remember search is your friend.
Complete List of Boosted Board V2+ Screws (Hardware)
I've put together a complete list of Boosted Board V2+ screws (aka hardware). I figured someone else could use it when they need to replace their gear.
Most screws are an M4 x 0.7mm, socket head cap screws (SHCS) with variations in length for each component taking a 3mm hex key (driver). The exceptions are the battery screws which take a 4mm hex and have a flat head.
Skid Plate Screws — M4 x 0.7mm, 6mm long, 3mm driver, stainless-steel
Motor Cap Screws — M4 x 0.7mm, 10mm long, 3mm driver, zinc-plated
Motor Mount (Belt Tightening) Screws — M4 x 0.7mm, (12mm?) long, 3mm driver, zinc-plated
Wheel Nuts — 5/16in, 24 thread, lock nut, zinc-plated
Deck Mounting Screws — 1.25-1.75in, zinc-plated (hex flat not SHCS)
Front Bearings — Longboard Bearings with Loose Spacers
Rear Outside Bearings — Longboard Bearings with No Spacers
Rear Inside Bearings — 6804-2RS Sealed Bearings
Truck to Motor Mount (Driver) Screws — M6 x 18mm, stainless-steel (hex flat not SHCS)
Battery Screws — M6 x 20mm, stainless-steel (hex flat not SHCS)
The following are additional items I've found and/or used that I think you should check out too.
Repair
Tools
Upgrades
Original Author Edit: Changed deck mounting screws length to include a range. My board needs a 1.75 because of risers and the Romp shock guard.
Original Author Edit2: Changed "Motor Mount" to "Truck to Motor Mount" after taking my board apart". Added "Motor Mount (Belt Tightening) Screws after noticing it was missing.
I have this one it works like a charm for cheap
https://www.amazon.com/dp/B01N11QV8J/ref=cm_sw_r_cp_apa_i_5MucFbPXPMHS0
This is cheaper https://www.amazon.com/dp/B072LY5824/ref=cm_sw_r_cp_apa_i_PSucFbWF2TVNF
Lifted from a much earlier post here on Reddit.
Complete List of Boosted Board V2+ Screws (Hardware)
I've put together a complete list of Boosted Board V2+ screws (aka hardware). I figured someone else could use it when they need to replace their gear.
Most screws are an M4 x 0.7mm, socket head cap screws (SHCS) with variations in length for each component taking a 3mm hex key (driver). The exceptions are the battery screws which take a 4mm hex and have a flat head.
Skid Plate Screws — M4 x 0.7mm, 6mm long, 3mm driver, stainless-steel
Motor Cap Screws — M4 x 0.7mm, 10mm long, 3mm driver, zinc-plated
Motor Mount (Belt Tightening) Screws — M4 x 0.7mm, (12mm?) long, 3mm driver, zinc-plated
Wheel Nuts — 5/16in, 24 thread, lock nut, zinc-plated
Deck Mounting Screws — 1.25-1.75in, zinc-plated (hex flat not SHCS)
Front Bearings — Longboard Bearings with Loose Spacers
Rear Outside Bearings — Longboard Bearings with No Spacers
Rear Inside Bearings — 6804-2RS Sealed Bearings
Truck to Motor Mount (Driver) Screws — M6 x 18mm, stainless-steel (hex flat not SHCS)
Battery Screws — M6 x 20mm, stainless-steel (hex flat not SHCS)
The following are additional items I've found and/or used that I think you should check out too.
Repair
Tools
Safety Gear
Upgrades
Edit: Changed deck mounting screws length to include a range. My board needs a 1.75 because of risers and the Romp shock guard.
Edit2: Changed "Motor Mount" to "Truck to Motor Mount" after taking my board apart". Added "Motor Mount (Belt Tightening) Screws after noticing it was missing.
Thanks for your note. Something like this? [this](Zeato All-in-One Skate Tools Multi-Function Portable Skateboard T Tool Accessory with T-Type Allen Key and L-Type Phillips Head Wrench Screwdriver - Black https://www.amazon.com/dp/B072LY5824/ref=cm_sw_r_cp_api_i_a9b1Db7SQQWSJ)