Yeah I'd be happy to share. There's definitely a few thing's I'd like to correct on the files so give me a little to work on those but here's the parts list for now:

• about 500 g of black PLA, you could basically use whatever here
• https://www.amazon.com/gp/product/B08FJ9RBNZ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 these fans are probably overkill but they work well
• https://www.amazon.com/gp/product/B08FJ9RBNZ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 this stuff is great, this sheet should be a perfect fit for the design. The side panels are 16x15 inches, the back is 16x13. Then you can fit the top sections in once the parts are printed. It's really easy just to cut this material with a box cutter. I'm sure that you could use something else as well if you wanted to save some costs.
• https://www.lowes.com/pd/DURAPLEX-0-08-in-T-x-18-in-W-x-24-in-L-Clear-Acrylic-Sheet/3143519 this maybe I'm less satisfied with, it's pretty tough to cut (Sadly I do not have access to a laser cutter atm since my university workshop is closed for COVID) and scratches very easily but gets the job done for cheap
• https://www.lowes.com/pd/Lambro-4-in-x-96-in-Foil-Flexible-Duct/3266293 for the duct, you could use whatever though
• https://www.lowes.com/pd/Hillman-3-4-in-Ceramic-Disc-Magnet/3115767 these get glued onto the acryllic and a few printed mounting points to keep the door and lid in position

I'll clean up my files right now and hopefully have those up soon! Good Luck!

I have some USB-powered fans with all my equipment. It’s nice to put a fan in a stack between a switch and a USG, or under a cable modem or whatever. Very quiet on the low speed, and very effective at lowering equipment temperature.