Btw, in case people are looking for other parts for a Boosted V2+/V3/Mini/Stealth
Most screws are an M4 x 0.7mm, socket head cap screws (SHCS) with variations in length for each component taking a 3mm hex key (driver). The exceptions are the battery screws which take a 4mm hex and have a flat head.
Skid Plate Screws — M4 x 0.7mm, 6mm long, 3mm driver, stainless-steel
Motor Cap Screws — M4 x 0.7mm, 10mm long, 3mm driver, zinc-plated
Motor Mount (Belt Tightening) Screws — M4 x 0.7mm, (12mm?) long, 3mm driver, zinc-plated
Wheel Nuts — 5/16in, 24 thread, lock nut, zinc-plated
Deck Mounting Screws — 1.25-1.75in, zinc-plated (hex flat not SHCS)
Front Bearings — Longboard Bearings with Loose Spacers
Rear Outside Bearings — Longboard Bearings with No Spacers
Rear Inside Bearings — 6804-2RS Sealed Bearings
Truck to Motor Mount (Driver) Screws — M6 x 18mm, stainless-steel (hex flat not SHCS)
Battery Screws — M6 x 20mm, stainless-steel (hex flat not SHCS)
An oldie, but goodie. Someone else posted all the hardware specs for Boosted v2+/v3 boards. I’ll paste it below.
Most screws are an M4 x 0.7mm, socket head cap screws (SHCS) with variations in length for each component taking a 3mm hex key (driver). The exceptions are the battery screws which take a 4mm hex and have a flat head.
Skid Plate Screws — M4 x 0.7mm, 6mm long, 3mm driver, stainless-steel
Motor Cap Screws — M4 x 0.7mm, 10mm long, 3mm driver, zinc-plated
Motor Mount (Belt Tightening) Screws — M4 x 0.7mm, (12mm?) long, 3mm driver, zinc-plated
Wheel Nuts — 5/16in, 24 thread, lock nut, zinc-plated
Deck Mounting Screws — 1.25-1.75in, zinc-plated (hex flat not SHCS)
Front Bearings — Longboard Bearings with Loose Spacers
Rear Outside Bearings — Longboard Bearings with No Spacers
Rear Inside Bearings — 6804-2RS Sealed Bearings
Truck to Motor Mount (Driver) Screws — M6 x 18mm, stainless-steel (hex flat not SHCS)
Battery Screws — M6 x 20mm, stainless-steel (hex flat not SHCS)
I saved this from an older post someone else did. Remember search is your friend.
Complete List of Boosted Board V2+ Screws (Hardware)
I've put together a complete list of Boosted Board V2+ screws (aka hardware). I figured someone else could use it when they need to replace their gear.
Most screws are an M4 x 0.7mm, socket head cap screws (SHCS) with variations in length for each component taking a 3mm hex key (driver). The exceptions are the battery screws which take a 4mm hex and have a flat head.
Skid Plate Screws — M4 x 0.7mm, 6mm long, 3mm driver, stainless-steel
Motor Cap Screws — M4 x 0.7mm, 10mm long, 3mm driver, zinc-plated
Motor Mount (Belt Tightening) Screws — M4 x 0.7mm, (12mm?) long, 3mm driver, zinc-plated
Wheel Nuts — 5/16in, 24 thread, lock nut, zinc-plated
Deck Mounting Screws — 1.25-1.75in, zinc-plated (hex flat not SHCS)
Front Bearings — Longboard Bearings with Loose Spacers
Rear Outside Bearings — Longboard Bearings with No Spacers
Rear Inside Bearings — 6804-2RS Sealed Bearings
Truck to Motor Mount (Driver) Screws — M6 x 18mm, stainless-steel (hex flat not SHCS)
Battery Screws — M6 x 20mm, stainless-steel (hex flat not SHCS)
The following are additional items I've found and/or used that I think you should check out too.
Repair
Tools
Upgrades
Original Author Edit: Changed deck mounting screws length to include a range. My board needs a 1.75 because of risers and the Romp shock guard.
Original Author Edit2: Changed "Motor Mount" to "Truck to Motor Mount" after taking my board apart". Added "Motor Mount (Belt Tightening) Screws after noticing it was missing.
Not my list, but I saved all this from an old post here. Wish I’d saved the name of who did it.
— snip from original post —
I've put together a complete list of Boosted Board V2+ screws (aka hardware). I figured someone else could use it when they need to replace their gear.
Most screws are an M4 x 0.7mm, socket head cap screws (SHCS) with variations in length for each component taking a 3mm hex key (driver). The exceptions are the battery screws which take a 4mm hex and have a flat head.
Skid Plate Screws — M4 x 0.7mm, 6mm long, 3mm driver, stainless-steel
Motor Cap Screws — M4 x 0.7mm, 10mm long, 3mm driver, zinc-plated
Motor Mount (Belt Tightening) Screws — M4 x 0.7mm, (12mm?) long, 3mm driver, zinc-plated
Wheel Nuts — 5/16in, 24 thread, lock nut, zinc-plated
Deck Mounting Screws — 1.25-1.75in, zinc-plated (hex flat not SHCS)
Front Bearings — Longboard Bearings with Loose Spacers
Rear Outside Bearings — Longboard Bearings with No Spacers
Rear Inside Bearings — 6804-2RS Sealed Bearings
Truck to Motor Mount (Driver) Screws — M6 x 18mm, stainless-steel (hex flat not SHCS)
Battery Screws — M6 x 20mm, stainless-steel (hex flat not SHCS)
The following are additional items I've found and/or used that I think you should check out too.
Repair
Lifted from a much earlier post here on Reddit.
Complete List of Boosted Board V2+ Screws (Hardware)
I've put together a complete list of Boosted Board V2+ screws (aka hardware). I figured someone else could use it when they need to replace their gear.
Most screws are an M4 x 0.7mm, socket head cap screws (SHCS) with variations in length for each component taking a 3mm hex key (driver). The exceptions are the battery screws which take a 4mm hex and have a flat head.
Skid Plate Screws — M4 x 0.7mm, 6mm long, 3mm driver, stainless-steel
Motor Cap Screws — M4 x 0.7mm, 10mm long, 3mm driver, zinc-plated
Motor Mount (Belt Tightening) Screws — M4 x 0.7mm, (12mm?) long, 3mm driver, zinc-plated
Wheel Nuts — 5/16in, 24 thread, lock nut, zinc-plated
Deck Mounting Screws — 1.25-1.75in, zinc-plated (hex flat not SHCS)
Front Bearings — Longboard Bearings with Loose Spacers
Rear Outside Bearings — Longboard Bearings with No Spacers
Rear Inside Bearings — 6804-2RS Sealed Bearings
Truck to Motor Mount (Driver) Screws — M6 x 18mm, stainless-steel (hex flat not SHCS)
Battery Screws — M6 x 20mm, stainless-steel (hex flat not SHCS)
The following are additional items I've found and/or used that I think you should check out too.
Repair
Tools
Safety Gear
Upgrades
Edit: Changed deck mounting screws length to include a range. My board needs a 1.75 because of risers and the Romp shock guard.
Edit2: Changed "Motor Mount" to "Truck to Motor Mount" after taking my board apart". Added "Motor Mount (Belt Tightening) Screws after noticing it was missing.