Planet Waves small glass slide

https://www.amazon.com/gp/product/B0049B3YXQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

momentary push button

https://www.amazon.com/gp/product/B07D373HZF/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

AC adapter. 12V6A

https://www.amazon.com/gp/product/B003TUMDWG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

induction heating power supply

https://www.amazon.com/gp/product/B01GDVVANA/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

​

i will add that i am going to try a 14/18mm adapter at some point to get a more snug fit to cut the heating time down. but this works great for now. this is my first post but i obviously lurked

I’m talking US$. Maybe that is why your # is higher. I also did not use a MOFSET board which is not needed if the button and power supply are rated appropriately.

Glass slide $4.29 . Built one with this. Another with 14/18 glass adapter. https://www.amazon.com/gp/product/B001FWYAWQ/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1

Momentary button $9.99

https://www.amazon.com/gp/product/B07D373HZF/ref=ox_sc_act_title_2?smid=A1792RTTLO6S27&psc=1

IH module $14.99

https://www.amazon.com/gp/product/B01GDVVANA/ref=ox_sc_act_title_3?smid=A1CJB5SYI9X4XC&psc=1

Power supply $9.99

https://www.amazon.com/gp/product/B06Y64QLBM/ref=ox_sc_act_title_4?smid=A3GP3KKILUBYIY&psc=1

I spliced and used electrical tape on my first build. Second build I just screwed the wires into the terminals (did not splice). If using a glass slide, the coil will be wider. Mine has 7 loops and clicks at about 25 seconds. 2nd build using a glass adapter has a tighter coil. 9 loops. Clicks at about 8 seconds. They both great. Gave the 1st to a friend along with a Cvap