The link is: Kia Cerato Forte K3 Emblem —... https://www.amazon.com/dp/B00E8U3AYQ?ref=ppx_pop_mob_ap_share

It was a bit of a pain. I warmed up the Forte badge with a heat gun. A hair dryer would work. I used dental floss to slice it off. Then, I used a micro fiber towel and acetone to remove the sticky residue.

I then used painters masking tape to align the logo, exactly how I wanted it. Flipped it up and removed the backing. Then, I it flipped down into position. Lightly press. Make sure it is exactly right. If you like the position, then firmly push it down. Once you firmly place it, that is it. It is on. So make sure that you like the position before you really push down.