Well I've never specifically used the Dayton Audio AMP products since I was just suspected the boards since they look the exact same as the chinese brands were just chinese rebrands.

This is what I ended up going with originally This AMP

Not that it sounds bad, but I knew there was no way I was going to get my 50x2 and 100x1, which is where I'm getting upset at this because I have speakers rated for 30 watts, and 1 rated at 60 watts, along with the tweeters rated at 30 watts.

My total configuration is 2x1" silk dome tweeters, 2x3" full range, 1 4" x midoofer. And then I have 2 passive 4" woofer/radiators in a box that was made way too small but we'll ignore that since this is a first time BT box build and I'm winging the shit out of it. (I don't recommend winging btw). And in the end it might sound fine all sealed up. (I overthink everything in the worst way) I have to get me some (real) 26650 batteries and wire it up for 12v Boosted to at least 18v. The 12v battery I had was definitely a cheap Knockoff fake which was sent back because it was insanely weak and short lived.

The only other thing I could do, Although it may force me to rebuild a bigger box is use multiple smaller amps bridged to get that 30 watts. Since you can do that on some of these smaller class-d boards that might be one of my short list options.

BOX PICS: box pic 1 box pic 2 box pic 3 that 3rd one I just used this for testing speakers, but the bigger box design would have been better IMO. (too late now)