I have an X1, I think the bed might be slightly different, so not sure if this is something you can safely do on an X2 bed or not. But the X1 bed is just as impossible to remove prints when clean.

I use a small paint scraper with a razor blade. Work it under several corners, and if that's not enough then start sliding it along under the longer sides from one of the now-loosened corners. Eventually the print should pop off the bed. If it's a particularly large print, with a lot of surface area, you might need to follow up with something like a palette knife to loosen the middle.

My scraper is similar to this: https://www.amazon.com/dp/B08P2QD5FB/

Palette knife: https://www.amazon.com/dp/B08NJP4ZWL/

This method will leave some marks on the bed, but they will come off when you clean the bed before the next print. At least that's how it goes with the X1 bed. Maybe someone who has both can chime in on the sturdiness of the surface of the X2 bed?