There is an easy modification to the stock hotend that you want to look into. Essentially you cut a small piece of Capricorne tube and lock it in the hotend with a printable washer to eliminate clogs due to a gap forming between the tube and the nozzle (which is common). Had I know about this simple fix I would have done it day one. You can also just simply buy this. If you buy this, you will need to enlarge the hole in the washer a little, see comments:
After tuning in the magnetic bed, I bought this and was amazed! Yes you have to wait for the bed to cool for it to come off (which will do almost by itself unless your footprint is large) but the adhesion is excellent I haven’t had to print rafts since I installed this. I took the adhesive off the back with razor blades and goo gone which wasn’t fun, otherwise I’d highly recommend this:
https://www.amazon.com/gp/aw/d/B07ZPKFGBV/ref=ppx_yo_mob_b_track_package_o1_img?ie=UTF8&psc=1