With a $500 to $700 budget I might suggest the following. Steer clear of the "packaged podcast stuff". And others will have their own opinions and thoughts but here are mine.

Recorder: Zoom H4nPro $230. Portable, flexible, will accept up to 4 inputs. Records on a SD Card.

Software: Audacity. It is free and allows you to manipulate and put together a cohesive product.

Mics: 2 of the ATR 2100 USB $150. Again, flexible and a decent beginner mic.

Accessories needed. 2 wind screen/pop filters for mics ($20), 2 mic stands ($20), 2 XLR cables for mics ($25)

Headphones: Sony MDR7560 $80 2 might be nice, but 1 required.

That is about $550 to $600 at this point.

If you wanted a studio mic, a decent starter mic is the MXL 990 at $100/ea. But beware that this is a condenser mic and it will pick up a ton of ambient sound especially in a non-treated room.

You may want to add a mixer into the mix at some point. I have a Behringer Xenyx 1204USB $139, but wish I had known more when I bought it and I would have bought the Behringer UFX1204 with the difference being that the one I have sends out a single stereo track to the recorder, but the latter has the ability to send separate tracks. Woudl be very handy if your guest is VERY soft spoken, there is a lot of talk over one another, etc.

Hello friend,

Good news is that XLR mics are generally better than USB mics. however, in order to use one you will need some sort of input into your computer. You can use a USB microphone preamp like the Blue Icicle ($31), a USB mixing board like the Behringer Xenyx 502USB ($60), or a USB tube preamp like the Scarlett ($100). However, each one of these uses a USB output to your computer.

If you CAN'T use a USB at all, then you will have to go through the soundcard on your PC. If you don't have a good sound card then you might want to get one for anywhere from $30 - $50. If that is the case, I suggest getting the Xenyx 502 without USB and the Creative 5.1. Together it will cost you about $85, but will allow you to use the Line in directly to your motherboard.

Now, let's talk mics. You will want an XLR mic. Depending on what option of input you went with, I suggest the:

AT2020 - $99

ATR2500 - $67

MXL 770 - $88

MXL 990 - $96

Samson C01 - $80

Don't forget a Pop filter ($6)

Okay so depending on how you do this here is what you do:

• XLR to USB - Plug your XLR mic into the board/preamp and then the USB into your computer.

• XLR no USB - Plug the XLR mix into the board/preamp. Use the Line Out of the board/preamp into the Line In on your sound card. You will need a 1/4 to 3.5mm adapter as well to plug into your card.

Hope this helps and let me know if you have any other questions!

::SeaOtterGamer

P.S. - Yes, I know you can get a headset (or mic) that uses a 3.5mm jack and plug it directly into your computer or soundcard. You will get better sound and more capabilities using an XLR setup. Plus, if you use a board like I do, you can adjust your settings on your desk and EQ before recording. It also looks super fancy.