Thanks for the detailed reply!
Do you think something like this would be sufficient:
Also the entire setup is inside, so no worries about waterproof enclosures. The link above is just a 12vdc power driver, also is 8.5a so should be enough?
I appreciate the help!
If you don't mind building You could make some DMX controllable LED strips:
LEDs: https://www.amazon.com/BTF-LIGHTING-2700K-3000K-Colors-Multi-Colored-Non-Waterproof/dp/B07G48K7C1
C channel: https://www.amazon.com/dp/B07RBB1XJP
Controller: https://www.amazon.com/dp/B07Q1ZJZN9
Power Supply: https://www.amazon.com/dp/B07D9FTC77
Like $140 for 16ft of LED wall wash lighting,
I have STL file for a mount to join the controller and Power Supply together if you have a 3d printer.
If you don't mind more involved building, you can make bigger LED light bars, We use 1 by 2 wood, and luan to build 3 inch wide, 2 inch deep, C channels then cut up flat Fluorescent Light Fixture Covers as the diffusers. worked great and cheep.
Example of them in use: https://imgur.com/BmuvbRp