Here is the peroxide i used - https://www.amazon.com/dp/B08SF7HSC3/ref=cm_sw_r_awdo_navT_a_YMWF4XQE7WDRT64PACNH

Here is the jar -

https://www.walmart.com/ip/Anchor-Hocking-Glass-1-2-Gallon-Glass-Heritage-Hill-Jar-with-Lid-2-Piece/17043674

Here is the uv lights -

https://www.amazon.com/dp/B083138WRC/ref=cm_sw_r_awdo_navT_a_ANTAAZC6WSFC9ZBJ15MK

And then i wrapped the jar in aluminum foil after tapping the lights to the outside of the jar. Then left the buttons in the peroxide in the jar for 26 hours with the lights on.

https://www.amazon.com/dp/B083138WRC?psc=1&ref=ppx_yo2ov_dt_b_product_details

I got this for $14, I didn't even check the wavelength. It's 385-400 for mine and things seem to cure anyways. The sticky backing on the LED strip made it super easy to just stick directly to the bucket. And it covers basically all angles except from the bottom, and I just sit it on a platform of aluminum foil. I just tip the model over after a bit.

From what I'm reading it here, you just gotta cook it in the oven for a little longer than 405

https://www.liqcreate.com/supportarticles/resin-3dprinting-385nm-405nm/